说明

• LUJINXUN 1” Tri Clamp 50 Brewing Equipment Heating Tube 1/2/5 TEN 304SUS Quick Connect Chuck Heater Element 1PC Specifications: Product Name: Flange Disc Heating TubeTube Length: 200mm/215mm/260mm/320mm/360mmVoltage: 110V/220V/380VPower: 1/2/3/4/5 Diameter: 8mmThread Diameter: 32mmFlange Disc: 50 (1 Tri-clamp)Tube Material: 304 stainless steelThread Material: 304 stainless steelPackage Contents: According to what you choose Pay attention: Power Allowance -10%~+5% 01/Introduction to Heating Tube:This heating tube is used as a heating element within water tanks, boilers, and water towers for brewing and fermentation equipment. No field what mannequin you choose, you'd replace it with the acceptable specifications. 02/How to measure the dimensions of heating tubes :① Voltage: 220V or 380V, Power: How many KW② Flange specifications: fifty one flange=outer diameter 51mm, sixty four flange=outer diameter 64mm, 77 flange=outer diameter 77, ninety one flange=outer diameter 91mm③ Tube length: The length can differ slightly, as lengthy because it can be put in into the system 03/Instructions: 1. Before installation, use a multimeter to check if the heating tube is powered on. If the measurement is correct, then continue with installation. If the scale is never powered on, please contact guest service. 2. The heating field of the heating tube needs to be permanently submerged underwater earlier than the flexibility would be grew to turn into on, and dehydration and dry burning are strictly prohibited. (Dehydration and dry burning confer with heating aspects that are partly or permanently uncovered to the water surface and electrified within the air. As warm temperature cannot be transferred out via method of water, it's completely absorbed through the steel tube, which may trigger the steel tube body to turn black and bulge, or maybe burn, break, or melt.) 3. If the heating equipment is provided with an automatic water filling device, the ball valve ought to be recalibrated after every single replacement of the heating tube to make sure that the liquid level is way above the position of the heating tube earlier than it can be used. To expensive all,1. Heaters are enterprise products, not vase. some could have flaws, akin to weld, comparable to chrome steel trace and varnish trace,that&;s normal. Because the heating cord contained in the heater tube is manufactured from OCr25A15 which is Magnetic, it's ordinary that the detail would be adsorbed via magnet. Under the condition of insulation, the overseas ordinary for the heater calories accept allowance -10% to 5% you are care about these, please think twice before make order. We do not accept dispute or unfavorable feedback about these you in your attention. Application: The electrical heating tube can't only be used as a heater for closed oil tanks, oil drums and hydraulic oil devices, but in addition as water tanks, boiler heaters, tank heaters, mold temperature mechanical device heaters, etc., and are broadly utilized in the heating of tanks-tanks-equipment in electronics, plastics, chemical industry and environmental engineering NOTICEAll programs from our store are registered site: 17track/en, PAYMENTVISA,Mastercard,WESTERN UNION,Maestro,Bank Transfer,QIVI WALLET,WebMoney,Boletol,PayPal WARRANTY SERVICEDelivery Time:Ship out inside 3-5working daysAll emails can be replied within 24 hours REFUND or RESENDIf items not acquired or damaged,please cooperate with us to take photos when you acquire it, then provide us the evidence,we will refund or resend a new one to you,thanks FEEDBACKAny questions please be at liberty contact with us before you leaving a feedback,we will try the best that will enable you to solve it Immediately.

• 
• 
• 
• 
• 

审核