说明

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler SealantDescription:1.It has high energy and fast bonding effect, and is acceptable for immediately attaching diversified components, LEDs and warmth sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging isn't clean to oxidize and dry, nice viscosity, short drying time. 3.It has nice conductivity, wide operating temperature differ (-60~200°C), and non permanent resistance to 300°C. 4.It has short surface curing time, lengthy storage period, non-toxic, solvent-free, and may be safely utilized to elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product directly during use, rubbing the skin of the adherend, and straight protecting it after use, in case of trial back 2) The floor constant speed is related to the relative humidity and temperature within the air; the better the temperature, the speedier the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to wash the outside of the bonded object earlier than use (such as alcohol), keep away from cleansing with detergent, and practice it after the surface is clean. 6.The kit is sealing and the product is covered with a vacuum bag to insulate the air and develop the garage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: 0 (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

审核