说明

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler CaulkDescription:1.It has high energy and rapid bonding effect, and is acceptable for directly attaching varied components, LEDs and warmth sinks. 2.Good thermal conductivity, solid adhesion, vacuum packaging isn't always smooth to oxidize and dry, nice viscosity, brief drying time. 3.It has nice conductivity, extensive working temperature vary (-60~200°C), and temporary resistance to 300°C. 4.It has short floor curing time, long storage period, non-toxic, solvent-free, and can be safely applied to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, heat sinks, etc. 5.Instructions: 1) Extrusion of the product immediately throughout use, rubbing the skin of the adherend, and instantly masking it after use, in case of trial again 2) The floor constant velocity is expounded to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to clean the surface of the bonded object earlier than use (such as alcohol), keep away from cleansing with detergent, and apply it after the outside is clean. 6.The package is sealing and the product is roofed with a vacuum bag to insulate the air and increase the garage time.Specifications:Thermal properties, solid glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

审核