Descriptions

• Four-port separate management (H802RA) WS2812B madrix Art-net controller I. Introduction of Controller 1. H802RA adopts regular Ethernet protocol and helps Art-Net protocol. 2, 4 output ports, can leadership quite many of LED driver chips, assist the automatic handle function. 3. The input network port would be instantly connected to the computer community card, offline and on-line grasp control, and may also be connected to the swap and photoelectric converter. 4. On-line supporting application is LED Studio Software or MADRIX, and off-line supporting utility is LED Programming Software. Second, the supported driver chips DMX512、HDMX； LPD6803、LPD8806、LPD1882、LPD1889、LPD1883、LPD1886； TM1812、TM1809、TM1804、TM1803、TM512、TM1926、TM1913、TM1914、TM1814； UCS6909、UCS6912、UCS1903、UCS1909、UCS1912、UCS512、UCS8904； APA102, APA104, P9813, WS2801, WS2803, WS2811, WS2812, WS2821, SM16716, SM16711, INK1003, LX1003, MY9221, MBI6021, MBI6024, LD 101. UCS8904 can management 3200 facets at most, and different chips can management 4096 points at most. MY9221, UCS8904 and MBI6024 are 65536 gray levels, LPD1886 is 4096 gray levels, MBI6021 is 1024 gray levels, and LD15XX totally controls 256 grey levels. Third, the performance characteristics 1. Four output ports, which can control as a lot as 4096 pixels. The most number of management features per port is 1024. 2. Support Art-Net protocol, which might cooperate with MADRIX software. 3. DMX chips of Tianwei and Lianxin Branch could be addressed. 4. It would be set as a repeater and amplifier through the use of LED Studio Software. 5, would be related and detached, could be immediately related to the pc network card, is also linked to the offline and online draw close control. 6. It is flexible to use, and the control aspects can be interchanged at will, so it has strong adaptability to lighting engineering. 7. The transmission distance is long. The transmission sign adopts normal Ethernet protocol, and the nominal distance is 100 meters. Sub-control can be utilized as relay, that may straight pass through photoelectric conversion module, making the transmission distance attain greater than 25 kilometers. V. Schematic diagram of the connection is hooked up to the computer online, and the supporting application is LED broadcasting software or Madrix. The main control is offline, and the SD card is controlled, and the supporting application is LED programming software. Note: Main control and sub-control, laptop computer and sub-control, and adjoining sub-control are linked via cross-network cable. Vi. Indicator status: The green indicator flashes: there may be records enter on the network port. The pink indicator flashes: there may be news output at 4 ports. The red indicator would not light: there is not any power. Vii. Port definition: GND, CLK, DAT, D-, D+ Two-wire driver chip connection: GND CLK DAT DMX512 lamps and lanterns are linked to GND D- D+. For single-line addressing, the addressing line is hooked up to CLK. General single-wire driving force chip is hooked up with GND DAT. Special TM1926, TM1913, TM1914 and TM1814 connections: GND D+

• 
• 
• 
• 
• 

Révision