Handheld Ultrasonic Cutting Machine Designed For Cutting Of Plastic Rubber Ultrasonic Knife 35KHz Ultrasonic CutterUltrasonic slicing knife, additionally referred to as ultrasonic slicing machine, is one of those ultrasonic package specially used for cutting. It is one of the fundamental lessons of ultrasonic application. The precept of ultrasonic decreasing is completely assorted from the traditional cutting. Ultrasonic reducing is to apply the calories of ultrasonic transducer to heat and soften the local a part of the minimize material, with a view to realize the point of slicing material. Therefore, ultrasonic chopping doesn't desire a sharp edge, nor does it need a lot of pressure, and won't trigger edge give way and injury of the lower material. At the same time, due to ultrasonic vibration of the lowering knife, the friction resistance is awfully small, and the cut materials is not delicate to adhere to the blade. This is particularly large for slicing viscous and elastic materials, frozen materials, reminiscent of food, rubber, etc., or objects inconvenient to use pressure of ultrasonic slicing machine:High stability: when the ultrasonic generator works, it produces 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the reducing knife and slicing materials. The mechanical reducing is carried out. Therefore, sharp edges are not required, the blade put on is small, and the cutter head can be changed through itself pollution: when reducing with ultrasonic knife, the temperature of the knife head is lower than 50 ℃, that won't produce smoke and odor, removing the chance of injury and hearth during chopping cutting: thanks to ultrasonic reducing by way of approach of high-frequency vibration, the material will not adhere to the blade surface, just a small stress is needed throughout cutting, and the fragile and gentle supplies aren't deformed and worn. The material chopping will routinely seal the edge at the same time, that won't cause edge collapse operation: the slicing knife is hooked up to the ultrasonic generator, the generator is attached to 220V mains power, and the change could be turned on for cutting. It supports hand-held reducing and is equipped with air-cooled interface tremendous good thing about ultrasonic chopping is that it has fusion effect at the reducing section whereas cutting, and the reducing part is completely sealed, that may no longer trigger flash of textile materials. The use of ultrasonic decreasing knife is also expanded, akin to hole digging, shovel digging, paint scraping, carving and so on vary of applications: all types of textile materials and plastic sheets can be reduce via ultrasonic, reminiscent of pure fibers, synthetic fibers, non-woven materials and knitted materials changes within the look or inner structure of the kit brought on by upgrades or optimizations will likely be based on the particular product. TypePower(W)Frequency (KHz)PLS-QGJ-100100W35khzPLS-QGJ-200200W35khzPLS-QGJ-300300W35khz