Descriptions

• Precautions (please learn carefully earlier than use): 1: Resin curing is relatively excessive and low laid low with temperature, the curing speed might be nearly doubled when the temperature is elevated by way of 10 ° C, and the curing speed might be bogged down a number of times if the temperature is lowered by 10 ° C or maybe lower (the concern is decided in keeping with the room temperature of 25 ° C). 2: Resin and curing agent reaction could be hot, the thicker the glue layer will produce more heat, heat assembly has bubbles produced, so the matching glue to be used quickly, brush skinny will solidify slowly. 3: A,B two teams needs to be strictly proportional weighing, B elements an excessive amount of or too little will impression the performance of the curing; A, B two ingredients mixed, should stir evenly, stirring uneven will trigger part of the curing, part of the non-curing condition. If you're a beginner, please use an digital scale to easily verify the ratio of A glue to B glue. 4: Glue in the curing process, curing agent will suck tide, when the air humidity is large, after curing the outside will have a layer of oily feeling, so the curing task to keep dry, don't solidify in the humidity of the environment, when the oil is produced, you would dry the surface, after which sandpaper grinding. 5: When the temperature is low, the A part will have crystallization phenomenon, corresponding to the manufacturing of granular rubber slag or permanently frozen, when the use of a glue would be heated, the temperature can be open, after the hole can be utilized normally, does not affect the performance. 6: Use is cautious to not contact the skin, touch with the outside infrequently there will be allergic phenomenon produced! Please wear disposable gloves in the course of the DIY crafts making process. 7:If you employ epoxy in a low temperature environment (below 25 levels Celsius) and need to hurry up curing, you can place the container of epoxy resin in scorching water, let it take a seat for 2-3 minutes, after which pour it into the mold. This reduces the curing time. 8:Resin merchandise have the characteristics of self-leveling, the outside is flat after curing, if you are made by utilizing a mold, then the contact floor of the resin and the mold and its edge must be polished after stripping, which has performed the impact you want. Notice: Due to the light and display difference, the item's coloration could also be various from the pictures. MicaPoder01 :4249BrilliantGold/435AGrassGreen/419MagicViolet/426Flesh Blue/418ARoseRed/308ClassicalGold; MicaPowder02 :525Mauve satin/417Red/504WineRed/508Coffee/308ClassicalGold/530GlitterBronze; MicaPowder03 :425MagicBlue/426Flesh Blue/427Universal Blue/4419SoftMagicViolet/419BViolet/419MagicViolet; MicaPowder04:401LusterBlack/407SilverGray/4402 SilverBlackSatin/103 SilverWhite/289ShimmerBlue/299 ShimmerGreen: MicaPowder05:435 AppleGreen/435AGrassGreen/4249 BrilliantGold/417Red/426Flesh Blue/418A RoseRed Procuct Model TC110 TC130 HL210 HL310 HL521 Casting thickness(one time): <1cm <1cm 2-4cm 5-7cm 10-18cm Mix Ratio: 1:1 by way of volume 2:1 by means of weight 2:1 through weight 3:1 by way of weight 2:1 through volume Working Time: 60-80min 7h 60-100min 60-100min 3-4h Gel Time: 5mm Thick 3-4h   2cm thick 3-4h 2cm Thick 3-4h 2cm Thick 7-10h Cure Time(indoor temperature 25℃) 24-48h 60℃ 3-4h 24-48h 24-48h 48-72h Mixed viscosity(25℃/cp): 1500-2000 600-900 600-1000 300-600 500-1000  

• 
• 
• 
• 
• 

Révision