Açıklamalar

• product news Product name: mxene changed conductive bendy published circuit with excessive conductivity and nice adhesion Product features: Good printability, electric conductivity, high hardness and robust adhesion. This kind of product has nice bending resistance, low modulus, nice performance and perfect solvent resistance. Good adhesion to PET, PI, ITO substrate and FR substrate. Typical applications: printing of electronic circuits reminiscent of membrane switches, keyboards, remote controls, flexible printed circuits and FPCs. Miniature large capacitor. Instructions for use: 1. Applicable substrate: PET, PC, ITO, etc. 2. Stir: Stir thoroughly for 5 to ten mins before use. 3. Dilute: particular diluent, the added percentage should not exceed 3% of the total weight. 4. Recommended process: Printing thickness: wet film: 20μm; dry film: 4-7μm; Silk screen: 250-300 mesh polyester or stainless-steel display printing; Scraper: Polyurethane or solvent resistant material; Equipment: Semi-automatic printing machine; Curing conditions: Oven: 130 ℃ × 20 min IR furnace: a hundred thirty five ℃ × 10 min (can be adjusted consistent with visitor requirements) Cleaning agent: acetone or diethylene glycol ether acetate. Due to the significant environmental impact of the process, display screen printing is recommended to be divided into batches and used up within 8 hours. Installing a protective disguise can reduce the volatilization of product substances and bring to a halt dust debris in the air to ensure quality.

• 
• 
• 
• 

Gözden geçirmek