Rated enter voltage:AC220-240V Frequency: 50/60Hz Insulation Level: F Level Environmental Conditions: Ambient Temperature-10 ℃ ~ 60 ℃; Relative Humidity Not More than 95% (Ambient Temperature Is 25 ℃) Starting Characteristics; When the Power Supply Voltage Is 85% of the Rated Voltage and the Test Water Pressure Is 0, the Inlet Valve Should Be Able to Start Normally. Vibration Test; Fix the Inlet Valve at the Vibrating Table. after the Full Amplitude Is 3mm, the Vibration Frequency Is 22Hz, and the Three Axes Are Vibrated for 10Min, the Inlet Valve Should Start Normally. Traffic Characteristics; Connect Inlet Valve to the Water Source According to the Working Position, and Apply the Rated Voltage beneath the Specified Water Pressure for 1Min, Which Should Meet the Requirements of Customer Drawings. Electrical Strength; Use the High-Voltage Test Equipment with a Voltmeter Accuracy of Not Less than 5%, the Leakage Current Is 0, and the Conductive Part Is Applied between Mounting Hole Continuous Power-on; Inlet Valve No Water Supply, Continuous Power Supply below Rated Voltage for 12H, Monitoring with Voltmeter, Valve Body Should Not Be Deformed, Coil Should Not Be Burnt out Identification; Each Inlet Valve Should Have a Clear Logo, Including the Manufacturer's Trademark, Product Model, and Manufacturing Date; (Customizable) Packaging; Product Packaging According to the Requirements of Gb/T 1019, There Is a Solid Packing Box, Packing Box Should Ensure That the Product Is Not Damaged beneath the General Transportation and Storage Conditions Compliance of Hazardous Substances; Compliance with Hazardous Substances for Products That Need to Meet the Limited Requirements of Hazardous Substances, Any Parts on the Products Must Meet the Requirements of National Laws. Insulation Resistance Check; Measure with a 500V Megohmmeter Or Insulation Resistance Tester with an Error of No More than ± 5% to Test the Insulation Resistance between the Conductive Part and the Exposed Non-Conductive Part Should Be Greater than a hundred Mohm