Описание

• Ultrasonic Impedance Analyzer Frequency Measuring Instrument Used In Electronic Components Sensor And Piezoelectric CeramicImpedance analyzer is a electronic impedance analyzer and precision LCR meter that units the recent traditional for impedance measurements within the frequency range from 1KHz‾5MHz (extended to five MHz when upgraded). The impedance analyzer is principally relevant to the dimensions of impedance traits of various ultrasonic devices, including: piezoelectric ceramics, transducers, ultrasonic cleaners, ultrasonic plastic welding machines, hydroacoustics, magnetostrictive materials, ultrasonic pulverizers, and ultrasonic atomization. , Ultrasonic teeth cleaning, reversing radar, ultrasonic ranging, ultrasonic emulsification, ultrasonic descaling, ultrasonic motors and all varied equipment using ultrasound. The traits of the impedance analyzer are: tender to use, mix of signals and graphics, appropriate parameters, low price, and robust guidance for production. Impedance tester application:Transducer: The admittance circle diagram shouldn't seem parasitic circles, the resonance frequency must be as close to the design frequency as possible, the dynamic impedance needs to be low, the traditional factor Qm must be near to the design requirements, and the capacitance must occasion the circuit. Piezoelectric ceramics: You can immediately favor the traditional of the system from the admittance circle diagram and logarithmic coordinates. If there are delaminations or cracks in the ceramic plate, the logarithmic curve will seem multi-peak, and the admittance circle diagram will seem multiple Madoka. Whether the design, processing and assembly of the horn is reasonable or faulty could be obviously considered immediately on the handbook circle chart. In the producing and processing of ultrasonic welding machine, the state of the welding mechanical device is analyzed through technique of the results of the admittance circle, and the issues recent within the welding machine are came across through the analysis of parameters and graphics. Production and processing of ultrasonic cleaning machine: The number of the vibrator calls for its vibration functionality to be as consistent as probable (bandwidth, determine of merit, resonance frequency, dynamic impedance). On the admittance circle chart, there ought to be no parasitic circles as lots as probable or close to the resonance point. Impedance attribute evaluation and dimension of transducer manufacturing, incoming inspection, bonded transducer, and washer could be performed. The total machine size of the bathing machine can calibrate the resonance frequency and static capacitance of the machine with a aim to check the ability supply, and it'd analyze its new resonance point, impedance after water injection, capacitance and traits of the vibration mode of the complete machine. ModelMeasuring FrequencyBasic AccuracyMeasuring ProductFeaturePLS-ZKFXY10001KHz-1MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY30001KHz-3MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY50001KHz-5MHz<0%ultrasonic transducer,piezoelectric ceramicdisplay

• 
• 
• 
• 

Отзывы