Описание

• LUJINXUN 1” Tri Clamp 50 Brewing Equipment Heating Tube 1/2/5 TEN 304SUS Quick Connect Chuck Heater Element 1PC Specifications: Product Name: Flange Disc Heating TubeTube Length: 200mm/215mm/260mm/320mm/360mmVoltage: 110V/220V/380VPower: 1/2/3/4/5 Diameter: 8mmThread Diameter: 32mmFlange Disc: 50 (1 Tri-clamp)Tube Material: 304 stainless steelThread Material: 304 stainless steelPackage Contents: According to what you choose Pay attention: Power Allowance -10%~+5% 01/Introduction to Heating Tube:This heating tube is used as a heating detail inside water tanks, boilers, and water towers for brewing and fermentation equipment. No matter what brand you choose, you could update it with the appropriate specifications. 02/How to measure the size of heating tubes :① Voltage: 220V or 380V, Power: How many KW② Flange specifications: fifty one flange=outer diameter 51mm, 64 flange=outer diameter 64mm, seventy seven flange=outer diameter 77, 91 flange=outer diameter 91mm③ Tube length: The size can differ slightly, as lengthy because it could be installed into the system 03/Instructions: 1. Before installation, use a multimeter to envision if the heating tube is powered on. If the scale is correct, then continue with installation. If the measurement isn't always powered on, please touch visitor service. 2. The heating subject of the heating tube needs to be permanently submerged underwater before the ability can be grew to grow to be on, and dehydration and dry burning are strictly prohibited. (Dehydration and dry burning discuss with heating features which are partly or permanently uncovered to the water surface and electrified within the air. As warmth can't be transferred out by way of way of water, it's completely absorbed by way of technique of the steel tube, which might trigger the steel tube body to reveal black and bulge, or even burn, break, or melt.) 3. If the heating kit is supplied with an automatic water filling device, the ball valve should be recalibrated after each substitute of the heating tube to make sure that the liquid point is way above the location of the heating tube before it may be used. To expensive all,1. Heaters are enterprise products, no longer vase. some may have flaws, reminiscent of weld, akin to stainless-steel hint and polish trace,that&;s normal. Because the heating twine contained in the heater tube is made of OCr25A15 which is Magnetic, it's common that the detail can be adsorbed by way of magnet. Under the condition of insulation, the overseas usual for the heater strength accept allowance -10% to 5% you are care about these, please think carefully before make order. We don't settle for dispute or unfavourable feedback about these you to your attention. Application: The electric heating tube can't completely be used as a heater for closed oil tanks, oil drums and hydraulic oil devices, but also as water tanks, boiler heaters, tank heaters, mold temperature machine heaters, etc., and are broadly utilized in the heating of tanks-tanks-equipment in electronics, plastics, chemical industry and environmental engineering NOTICEAll programs from our store are registered site: 17track/en, PAYMENTVISA,Mastercard,WESTERN UNION,Maestro,Bank Transfer,QIVI WALLET,WebMoney,Boletol,PayPal WARRANTY SERVICEDelivery Time:Ship out within 3-5working daysAll emails will be responded within 24 hours REFUND or RESENDIf goods not obtained or damaged,please cooperate with us to take images when you get preserve of it, then reward us the evidence,we will refund or resend a new one to you,thanks FEEDBACKAny questions please feel free contact with us before you leaving a feedback,we will try the finest that will help you resolve it Immediately.

• 
• 
• 
• 
• 

Отзывы