Описание

• Handheld Ultrasonic Plastic Cutter 35khz Ultrasonic Manual Nonwoven Fabric Cut Machine Portable Cutting KnivesUltrasonic decreasing knife, also called ultrasonic chopping machine, is a kind of ultrasonic package specially used for cutting. It is one of the important categories of ultrasonic application. The principle of ultrasonic cutting is absolutely varied from the traditional cutting. Ultrasonic chopping is to apply the energy of ultrasonic transducer to warmth and soften the local part of the lower material, so as to achieve the point of cutting material. Therefore, ultrasonic reducing doesn't need a sharp edge, nor does it desire a lot of pressure, and will not trigger edge give way and harm of the reduce material. At a similar time, due to ultrasonic vibration of the slicing knife, the friction resistance is especially small, and the reduce materials is never easy to stick to the blade. This is very tremendous for cutting viscous and elastic materials, frozen materials, equivalent to food, rubber, etc., or goods inconvenient to use pressure of ultrasonic reducing machine:High stability: when the ultrasonic generator works, it produces 40KHz electromagnetic vibration, which is converted into mechanical vibration and transmitted to the decreasing knife and slicing materials. The mechanical reducing is carried out. Therefore, sharp edges are usually not required, the blade wear is small, and the cutter head would be replaced by way of method of itself pollution: when cutting with ultrasonic knife, the temperature of the knife head is lower than 50 ℃, that won't produce smoke and odor, eliminating the chance of harm and fire throughout cutting cutting: due to ultrasonic lowering through high-frequency vibration, the material won't adhere to the blade surface, just a small strain is required throughout cutting, and the delicate and mild materials are not deformed and worn. The cloth decreasing will routinely seal the edge on the identical time, that may not cause edge fall down operation: the slicing knife is hooked up to the ultrasonic generator, the generator is attached to 220V mains power, and the swap would be turned on for cutting. It supports hand-held cutting and is provided with air-cooled interface great benefit of ultrasonic chopping is that it has fusion effect on the lowering part whereas cutting, and the slicing section is absolutely sealed, that may now not set off flash of textile materials. The use of ultrasonic lowering knife can also be expanded, equivalent to gap digging, shovel digging, paint scraping, carving and so on range of applications: all types of textile supplies and plastic sheets could be lower by way of ultrasonic, similar to natural fibers, synthetic fibers, non-woven supplies and knitted materials modifications within the appearance or inner constitution of the kit caused by upgrades or optimizations can be according to the particular product. TypePower(W)Frequency (KHz)PLS-QGJ-100100W35khzPLS-QGJ-200200W35khzPLS-QGJ-300300W35khz

• 

Отзывы