Описание

• 5 Pieces Of Semiconductor TEC1-12706 40X40mm Water Cooler Cooling Fins For Water Dispenser Cooler Equipment Model: TEC1-12706. Equipped with 15 cm lengthy insulated cable. one hundred pc fresh and excessive quality. Each mechanical device has been thoroughly examined and tested. Used to make cool bags, cool PC parts, etc. It is also appropriate for beverage coolers/bottle warmers. Using Peltier elements, you may soon cool or heat the temperature by means of approach of reversing the polarity. Simply opposite the polarity and it'll turn to ice or boil in a few minutes. This is utilized in many applications, from CPU coolers to alternative strength supplies, and even hot/cold on your own car. Standard parameter Wire specification: lead size 300 +/- 5m RV standard cord unmarried head 5m tin plated Internal resistance: 2~2 (ambient temperature 23 +/- 1℃, 1 KHZ Ac test) Maximum temperature difference: △Tmax(Qc=0) above 60℃ Working current: Imax=5 (after constant 12V, it is about four in line with the warmth dissipation potential Rated voltage: DC12V (Vmax: 15V starting current 5) Refrigeration power: Cmax58-65W Assembly pressure: 85N/cm2 Working environment: temperature differ -55℃~83℃ (too excessive ambient temperature drop immediately affects cooling efficiency) Storage conditions: -40~60℃ How can it's refrigerated: 1. Prepare-5 broad pieces, cooling fin + radiator + silicone grease insulation pad + strength delivery 2. Put silicone grease on the hot and bloodless floor of the refrigeration sheet 3. Install the cooling fins at the radiator, with a warm temperature insulation pad within the middle 4. The locking screw is energized and refrigerated Colour: white Material: ABS Size: 40mm x 40mm x three Package Contents: five x cooling fins Only the above package content, diversified item should not included. Note: Light capturing and various reveals can cause the color of the article within the picture a piece different from the real thing. The dimension allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Отзывы