Описание

• Flame failure valve with inlet and outlet with Flare thread 5/8-18UNF Only appropriate for Low pressure software (max BTU rating: 50000) Suitable for Gas grill, heater, fire pit, fireplace if identical connections Specifications: 600mm thermocouple with M8*1 threaded head Bakelite knob OD 38mm, D shaft 6 Operation Instructions 1. Fix the valve on a plate or board of your grill or fire pit in the course of the head screw and flange. 2. Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly sufficient in case of gasoline leakage) 3. Fix the thermocouple nut M8 on the valve finish tightly (Check in case your valve finish thread if 8mm earlier than you buy) 4. Connect thermocouple and end thread well 5. Open gasoline by way of means of right size knob and push your valve round 5-10s until the thermocouple head is heated enough. 6. Release your hand and it paintings correctly If once you release hand, gas valve close off again, please confirm If your thermocouple is often be heated on flame If the thermocouple finish is unquestionably related with valve If the inlet and outlet component correctly hook up with hose you've Colour: yellow Material: copper Package Contents: 2 x Gas Control Valve Only the above equipment content, different merchandise aren't included. Note: Light reflection and assorted exhibits could cause the color of the object within the photo somewhat different from the genuine thing. The measurement allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Отзывы