Описание

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler CaulkDescription:1.It has high strength and rapid bonding effect, and is suitable for directly attaching assorted components, LEDs and heat sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging isn't clean to oxidize and dry, good viscosity, short drying time. 3.It has nice conductivity, broad operating temperature fluctuate (-60~200°C), and temporary resistance to 300°C. 4.It has brief surface curing time, lengthy garage period, non-toxic, solvent-free, and might be safely utilized to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product immediately throughout use, rubbing the skin of the adherend, and immediately covering it after use, in case of trial again 2) The floor fixed velocity is expounded to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to scrub the skin of the bonded object earlier than use (such as alcohol), keep away from cleaning with detergent, and follow it after the skin is clean. 6.The kit is sealing and the product is covered with a vacuum bag to insulate the air and increase the storage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Отзывы