Preces apraksts

• Voltage: DC12V, energy wire size 2, energy 180W. Generally, 2-3 grams of oxalic acid will evaporate completely in 2 minutes, and 4-5 grams in 3 minutes. After the evaporation whole indicator light mechanically is going out, turn off the switch, take out the device, and then disguise the nest door with a compress for 10-15 minutes. 1. When connecting the system to the flexibility supply, hear in at the high quality and damaging poles, otherwise the replace indicator mild won't mild up. 2. When the package is heated, the temperature of the oxalic acid fuel is comparatively high, and human fingers shouldn't be close to the gas. 3. The kit and smoke outlet don't have to be cleaned. When the medication is melted next time, the remaining remedy might be routinely melted and used. 4. Please don't disassemble the product by way of means of yourself. The product has small parts, and the ingredients are extremely clear to lose after disassembly. Please do not use a number of beehives at full prospective continuously. The lid might fly off due to too much oxalic acid (Greater than 8g). Use a battery to connect the equipment, with a maximum output recent of now not less than 20A. The capacity of a flat spoon is decided 1, and the means of a complete spoon is in a position 2-2. Open the lid, put a suitable amount of oxalic acid into the evaporator. The exhaust pipe enters the inside of the beehive in the course of the door of the beehive. Seal the door, shut the lowest window and varied openings of the beehive, and fasten the machine to the ability supply (red battery clip connection to the battery '+' level, otherwise the indicator soft won't light up) Turn at the switch, the indicator light will gentle up, the medicine will begin to atomize when heated, and the smoke will fill the whole beehive. color: blue Material: abs+metal Package Contents: 1 x Bee oxalic acid evaporator Only the above kit content, other merchandise shouldn't included. Note: Light reflection and varied displays may cause the colour of the thing within the photograph a little bit various from the genuine thing. The dimension allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Atsauksmes