Preces apraksts

• Din Rail four Channel Constant Voltage DMX512 RDM Decoder Model No. : D4 RDM/Stand-alone function/Six PWM frequency/Linear or logarithmic dimming/Numeric display/Din Rail/Multiple protection Input and Output Input voltage: 12-24VDC Input recent : 20 Output voltage : four x (12-24)VDC Output recent : 4CH,5A/CH Output power : 4 x (60-120)W Output type:Constant voltage Features: ● Comply with the DMX512 regular protocols. ● Digital numeric display, set DMX decode delivery take care of by way of means of buttons. ● RDM operate can perceive intercommunication between DMX master and decoder. For example, DMX decoder address can be set by way of DMX draw close console. ● 1/2/4 DMX channel output selectable. ● 16bit (65536 levels) /8bit (256 levels) gray level selectable. ● PWM frequency 500/1000/2000/4000/8000/16000Hz selectable. ● Logarithmic or linear dimming curve selectable. ● Stand-alone RGB/RGBW mode and four channel dimmer mode selectable, which be managed by means of means of buttons with included programs, rather than DMX signal. ● Over-heat / Over-load / Short circuit protection, recuperate automatically. Package content: 1pcs* D4 four Channel Constant Voltage DMX512 RDM Decoder 1pcs* Introduction Manual Operation: System parameter atmosphere ● Long press M and ◀ key in the identical time for 2s, prepare for setup components parameter: decode mode, grey level, output PWM frequence, output brightness curve, default output level, automatic clean screen. brief press M key to alter six item. ● Decode mode: short press ◀ or ▶ key to change 1/2/4 channel decode mode("d-1","d-2" or "d-4"). When set as 1 channel decode, the decoder occupy solely 1 DMX address, and four channel output the same brightness of this DMX address. ● Grey level: brief press ◀ or ▶ key to change 8bit("b08") or 16 bit("b16"). prefer 16 bit if the DMX grasp help 16 bit. ● Output PWM frequency: brief press ◀ or ▶ key to alter 250Hz("F02"), 500Hz("F05"), 1000Hz("F10"), 2000Hz("F20"), 4000Hz("F40"), 8000Hz("F80") or 16000Hz("F16"). Higher PWM frequency, will trigger lower output current, larger energy noise, but more compatible for camera(No ickers for video). ● Output brightness curve: brief press ◀ or ▶ key to change linear curve("C-L") or logarithmic curve("C-E"). ● Default output level: press ◀ or ▶ key to change default 0-100% level ("d00" to "dFF" ) when no DMX enter signal. ● Automatic clean screen: brief press ◀ or ▶ key to switch allow ("bon") or disable("boF") automated clean screen. ● Long press M key for 2s or timeout 10s, give up components parameter setting. DMX mode ● Short press M key, when exhibit 001~512, input DMX mode. ● Press ◀ or ▶ key to change DMX decode beginning address(001~512), prolonged press for immediate adjustment. ● If there is a DMX sign input, will enter DMX mode automatically. ● DMX Dimming: Each D4-L DMX decoder occupy four DMX deal with when connecting the DMX console. For example, the defaulted delivery handle is 1, their corresponding dating in the form: Stand-alone RGB/RGBW mode: ● Enter stand-alone RGB/RGBW mode only when DMX signal is disconnected or lost. ● Short press M key, when exhibit P01~P30, input stand-alone RGB/RGBW mode. ● Press ◀ or ▶ key to change dynamic mode number(P01~P30). ● Each mode can adjust velocity and brightness. Long press M key for 2s, practice for setup mode speed, brightness, W channel brightness. Short press M key to switch three item. Press ◀ or ▶ key to setup value of every item. Mode speed: 1-10 level speed(S-1, S-9, S-F). Mode brightness: 1-10 point brightness(b-1, b-9, b-F). W channel brightness: 0-255 point brightness(400-4FF). Long press M key for 2s, or timeout 10s, quit setting. Stand-alone dimmer mode: ● Enter stand-alone dimmer mode completely when DMX signal is disconnected or lost. ● Short press M key, when reveal L-1~L-8, input stand-alone dimmer mode. ● Press ◀ or ▶ key to alter dimmer mode number(L-1~L-8). ● Each dimmer mode can modify each channel brightness independently. Long press M key for 2s, practice for setup 4 channel brightness. Short press M key to change 4 channel(100~1FF, 200~2FF, 300~3FF, 400~4FF). Press ◀ or ▶ key to setup brightness fee of every channel. Long press M key for 2s, or timeout 10s, give up setting. Restore manufacturing facility default parameter: ● Long press ◀ and ▶ key for 2s, repair factory default parameter, display"RES". ● Factory default parameter: DMX decode mode, DMX decode shipping tackle is 1, 4 channel decode, 8 bit grey level, 2000Hz PWM frequence output, logarithmic brightness curve, output 100% point when no DMX input, RGB mode number is 1, dimmer mode number is 1, disable automated clear screen.

• 
• 
• 
• 
• 

Atsauksmes