Preces apraksts

• Portable Ultrasonic Cutter Knife With 35khz Power Generator For PVC Polyethylene Plate Material CutUltrasonic cutting knife, additionally called ultrasonic chopping machine, is a kind of ultrasonic equipment specifically used for cutting. It is one of the most fundamental lessons of ultrasonic application. The principle of ultrasonic reducing is absolutely different from the traditional cutting. Ultrasonic cutting is to use the calories of ultrasonic transducer to warmth and soften the native a part of the lower material, so as to achieve the purpose of reducing material. Therefore, ultrasonic reducing would not need a sharp edge, nor does it want a lot of pressure, and will not cause edge cave in and damage of the reduce material. At the same time, due to ultrasonic vibration of the reducing knife, the friction resistance is especially small, and the reduce materials is not clean to stick to the blade. This is very tremendous for lowering viscous and elastic materials, frozen materials, corresponding to food, rubber, etc., or goods inconvenient to apply stress of ultrasonic cutting machine:High stability: when the ultrasonic generator works, it produces 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the slicing knife and chopping materials. The mechanical decreasing is carried out. Therefore, sharp edges will not be required, the blade put on is small, and the cutter head can be changed by means of itself pollution: when chopping with ultrasonic knife, the temperature of the knife head is less than 50 ℃, that will now not produce smoke and odor, getting rid of the chance of damage and hearth throughout slicing cutting: because of ultrasonic lowering through high-frequency vibration, the fabric won't adhere to the blade surface, just a small stress is required throughout cutting, and the fragile and comfortable materials are not deformed and worn. The material chopping will robotically seal the edge at the similar time, which will no longer trigger edge cave in operation: the decreasing knife is hooked up to the ultrasonic generator, the generator is hooked up to 220V mains power, and the change can be turned on for cutting. It helps handheld reducing and is provided with air-cooled interface large good thing about ultrasonic reducing is that it has fusion impact at the reducing section whereas cutting, and the cutting section is absolutely sealed, that will not set off flash of textile materials. The use of ultrasonic cutting knife can be expanded, comparable to hole digging, shovel digging, paint scraping, carving and so on range of applications: all kinds of textile materials and plastic sheets can be minimize via ultrasonic, corresponding to natural fibers, man made fibers, non-woven fabrics and knitted fabrics adjustments in the appearance or inside constitution of the equipment brought on by upgrades or optimizations would be in line with the particular product. TypePower(W)Frequency (KHz)PLS-QGJ-100100W35khzPLS-QGJ-200200W35khzPLS-QGJ-300300W35khz

• 
• 

Atsauksmes