Preces apraksts

• Piezoelectric Transducer Components Ultrasonic Frequency Analyzer 1Mhz Smart Ultrasound Parts Inspection EquipmentImpedance analyzer is a digital impedance analyzer and precision LCR meter that sets the new typical for impedance measurements within the frequency vary from 1KHz‾5MHz (extended to 5 MHz when upgraded). The impedance analyzer is particularly relevant to the scale of impedance characteristics of various ultrasonic devices, including: piezoelectric ceramics, transducers, ultrasonic cleaners, ultrasonic plastic welding machines, hydroacoustics, magnetostrictive materials, ultrasonic pulverizers, and ultrasonic atomization. , Ultrasonic tooth cleaning, reversing radar, ultrasonic ranging, ultrasonic emulsification, ultrasonic descaling, ultrasonic motors and all other kit using ultrasound. The traits of the impedance analyzer are: easy to use, combination of indicators and graphics, right parameters, low price, and strong steering for production. Impedance tester application:Transducer: The admittance circle diagram shouldn't appear parasitic circles, the resonance frequency must be as near to the design frequency as possible, the dynamic impedance ought to be low, the traditional element Qm ought to be near to the design requirements, and the capacitance should match the circuit. Piezoelectric ceramics: You can instantly decide the standard of the machine from the admittance circle diagram and logarithmic coordinates. If there are delaminations or cracks within the ceramic plate, the logarithmic curve will appear multi-peak, and the admittance circle diagram will seem several Madoka. Whether the design, processing and assembly of the horn is reasonable or faulty would be of course seen straight at the guide circle chart. In the production and processing of ultrasonic welding machine, the state of the welding machine is analyzed during the result of the admittance circle, and the issues present in the welding mechanical device are found in the course of the evaluation of parameters and graphics. Production and processing of ultrasonic cleansing machine: The collection of the vibrator calls for its vibration performance to be as consistent as possible (bandwidth, determine of merit, resonance frequency, dynamic impedance). On the admittance circle chart, there ought to be no parasitic circles as much as possible or close to the resonance point. Impedance characteristic evaluation and size of transducer manufacturing, incoming inspection, bonded transducer, and washer could be performed. The whole machine measurement of the showering machine can calibrate the resonance frequency and static capacitance of the mechanical device as a fashion to match the power supply, and it is going to analyze its new resonance point, impedance after water injection, capacitance and trends of the vibration mode of the complete machine. ModelMeasuring FrequencyBasic AccuracyMeasuring ProductFeaturePLS-ZKFXY10001KHz-1MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY30001KHz-3MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY50001KHz-5MHz<0%ultrasonic transducer,piezoelectric ceramicdisplay

• 
• 
• 
• 

Atsauksmes