Preces apraksts

• LUJINXUN 1"(50) Tri-clamp Brew Heater 304 Stainless Steel Ten 220V Electric Boilers for Heating With Clamp and Adpter 1pc Specifications: Product Name: Flange Disc Heating TubeTube Length: 200mm/215mm/260mm/320mm/360mmVoltage: 110V/220V/380VPower: 1/2/3/4/5 Diameter: 8mmThread Diameter: 32mmFlange Disc: 50 (1 Tri-clamp)Tube Material: 304 stainless steelThread Material: 304 stainless steelPackage Contents: 1pc heating element with black cover,clamp and adpter Pay attention: Power Allowance -10%~+5% 01/Introduction to Heating Tube:This heating tube is used as a heating detail within water tanks, boilers, and water towers for brewing and fermentation equipment. No subject what mannequin you choose, you might update it with the appropriate specifications. 02/How to measure the dimensions of heating tubes :① Voltage: 220V or 380V, Power: How many KW② Flange specifications: 51 flange=outer diameter 51mm, 64 flange=outer diameter 64mm, seventy seven flange=outer diameter 77, ninety one flange=outer diameter 91mm③ Tube length: The size can vary slightly, as long because it can be installed into the system 03/Instructions: 1. Before installation, use a multimeter to ascertain if the heating tube is powered on. If the dimensions is correct, then proceed with installation. If the size isn't powered on, please contact visitor service. 2. The heating discipline of the heating tube should be permanently submerged underwater before the power would be became on, and dehydration and dry burning are strictly prohibited. (Dehydration and dry burning talk over with heating features that are in part or permanently uncovered to the water surface and electrified in the air. As heat cannot be transferred out by way of water, it's permanently absorbed by way of the metallic tube, which may set off the metal tube physique to turn black and bulge, or maybe burn, break, or melt.) 3. If the heating package is supplied with an automatic water filling device, the ball valve should be recalibrated after every single substitute of the heating tube to ensure that the liquid point is much above the placement of the heating tube earlier than it can be used. To costly all,1. Heaters are business products, no longer vase. some can have flaws, similar to weld, equivalent to stainless-steel trace and polish trace,that&;s normal. Because the heating wire contained within the heater tube is fabricated from OCr25A15 which is Magnetic, it is ordinary that the element could be adsorbed via magnet. Under the condition of insulation, the abroad traditional for the heater energy accept allowance -10% to 5% you are care about these, please think carefully before make order. We don't accept dispute or unfavourable feedback about those you to your attention. Application: The electric heating tube can not completely be used as a heater for closed oil tanks, oil drums and hydraulic oil devices, but also as water tanks, boiler heaters, tank heaters, mildew temperature machine heaters, etc., and are broadly used in the heating of tanks-tanks-equipment in electronics, plastics, chemical industry and environmental engineering NOTICEAll programs from our store are registered site: 17track/en, PAYMENTVISA,Mastercard,WESTERN UNION,Maestro,Bank Transfer,QIVI WALLET,WebMoney,Boletol,PayPal WARRANTY SERVICEDelivery Time:Ship out within 3-5working daysAll emails is probably answered inside 24 hours REFUND or RESENDIf items no longer obtained or damaged,please cooperate with us to take images once you get hold of it, then reward us the evidence,we will refund or resend a new one to you,thanks FEEDBACKAny questions please be at liberty contact with us before you leaving a feedback,we will try the finest that may aid you resolve it Immediately.

• 
• 
• 
• 
• 

Atsauksmes