Preces apraksts

• Ice Maker Spare Parts 220V PSC25PJDVF2 25W Motor Water Pump Reminder: To purchase accessories, please give you the kit nameplate, mechanical device mannequin and accessories pictures; seek advice from customer service before placing an order Name: Ice Maker Pump Upper Water Pump Motor Motor Model:PSC25PJDVF2 Frequency: 50Hz /60HZ Power: 25W Voltage: 220V-240V Current: 0 Speed :2800r/min 1. Different specs of this collection of products are powered through means of assorted power assets such as single-phase AC 220V/380V, 50/60HZ, etc., and the explicit nameplate label on the product shall prevail. Before use, please verify whether or not or now not the relationship to the flexibility supply is good and reliable, and examine whether the voltage parameters on the nameplate of the pump are in retaining with the output voltage parameters of the flexibility supply. 2. The ice-making machine water pump is assembled to the ice-making mechanical device as a component. Fix the water pump in an appropriate position during the installation bracket, and properly and reliably join the water pump strength cord, grounding cord and water pipe, and the water pump could be connected to the water normally. The ice maker works. Note: Do not make other adjustments to the water pump except utilizing the mounting bracket, connecting the power supply, and water pipes, such as opening the pump motor casing, changing the water outlet direction of the water pump, etc. Users who do those operations via means of themselves may perhaps injury the motor constitution or due to improper restoration and assembly influence the use of the product. 3. When installing, keep the motor part of the pump as remote from the water surface as possible. Make yes that the cooling fan at the shaft extension has a enough distance from the water surface. 4. When the ice maker leaves the factory, try to alter the drift ball that controls the water point to the lowest level. Because the water pressure in some locations is comparatively high, the impulse of the mechanical device is massive when the water enters, and the flow ball and the water inlet solenoid valve will delay the action. It ought to be averted that the water level of the water tank is simply too immoderate and it touches the cooling fan at the water pump. The water point in the water tank (box) should not be too high, and the acceptable water is to submerge 1/3 of the plastic body below the water pump motor. bit height. 5. The overflow port in the sink must be as low as probable and big satisfactory to ensure that the surplus water can be drained away in time within the use subject with excessive water pressure. 6. The set up position of the water pump must be as distant from the water inlet (note) of the ice maker as possible to bypass the water flowing directly to the water pump when the water enters. The choice of the installation position of the water pump must also listen in on that the water splashed from the ice tray (tray) doesn't splash on the water pump physique when the ice maker is working shop additionally has varied ice mechanical device pumps, everytime you need, please touch guest service.

• 
• 
• 
• 
• 

Atsauksmes