Preces apraksts

• Precautions (please learn intently before use): 1: Resin glue curing pace is related to quantity size and temperature, the thicker the adhesive layer, the faster the curing, the better the temperature, the quicker the curing.Therefore, the extra mixing, the shorter the working time, the bigger the dimensions of the seal will be, the slower the reverse. 2: Resin and curing agent response could be hot, the thicker the glue layer will produce more heat, warmth assembly has bubbles produced, so the matching glue to be used quickly, brush skinny will solidify slowly. 3: A,B two groups needs to be strictly proportional weighing, B ingredients an excessive amount of or too little will influence the functionality of the curing; A, B two elements mixed, must stir evenly, stirring choppy will cause a part of the curing, a part of the non-curing condition. If you are a beginner, please use an digital scale to easily confirm the ratio of A glue to B glue. 4: Glue in the curing process, curing agent will suck tide, when the air humidity is large, after curing the outside may have a layer of oily feeling, so the curing process to maintain dry, do not solidify in the humidity of the environment, when the oil is produced, you may dry the surface, and then sandpaper grinding. 5: When the temperature is low, the A part will have crystallization phenomenon, resembling the production of granular rubber slag or permanently frozen, when the use of a glue would be heated, the temperature could be open, after the outlet can be used normally, does not affect the performance. 6: Use is careful to not contact the skin, contact with the outside occasionally there will be allergic phenomenon produced! Please put on disposable gloves in the course of the DIY crafts making process. Procuct Model TC110 TC130 HL210 HL310 HL521 Casting thickness(one time) <1cm <1cm 2-4cm 5-7cm 10-18cm Mix Ratio 1:1 by means of volume 2:1 via weight 2:1 by weight 3:1 by means of weight 2:1 via volume Working Time 60-80min 7h 60-100min 60-100min 3-4h Gel Time 5mm Thick 3-4h   2cm thick 3-4h 2cm Thick 3-4h 2cm Thick 7-10h Cure Time(indoor temperature 25℃) 24-48h 60℃ 3-4h 24-48h 24-48h 48-72h Mixed viscosity(25℃/cp) 1500-2000 600-900 600-1000 300-600 500-1000

• 
• 
• 
• 
• 

Atsauksmes