Preces apraksts

• Solenoid valve desire process Step 1: Determine the voltage. AC for alternating current, DC for direct current. Step 2: Determine the water pressure. If there could also be water pressure (such as tap water and pump water) andthe stress fluctuate is 0, prefer the water inlet valve; No water stress (for example, zero m immoderate water tank) Pressure range: 0-0, desire the water discharge valve. Step 3: Determine the water temperature. Choose plastic valve at room temperature, copper valve or chrome steel valve at immoderate temperature. Step 4: Determine the caliber. Valve body inlet and outlet diameter length in holding with the particular pattern or set up requirements. Step 5: Special requirements. Please take the initiative to seek advice from customer service, by way of method of negotiation to reach a solution. General InstructionsRoutine instructions are a question that virtually every single visitor asks1. What is a strain valve (inlet valve) and what is a pressureless valve (drain valve)?The pressure valve also is referred to because the inlet valve, and the non-pressure valve also is referred to as the drain valve. If there could also be pressure, it potential there may be water pressure. If there isn't any pressure, it prospective no water pressure. The pressure valve is suitable for 0~0 water pressure, no pressure valve is acceptable for 0-0(0)pa water pressure, if the solenoid valve isn't always used in the standard pressure range, it'll no longer paintings normally! The container is used for water discharge with out pressure. However, because the water stress modifications and the scale of the water tank should not absolute, it's more clean to claim that the water output is sprayed with pressure, and the video display movement is with out pressure. Because we can&;t grasp the specific use environment of the parent, we solely give you the reference standard, and we need to choose it by way of ourselves. In particular, please use AC220V pressure-free valve with caution, this one can have jitter and noise. Diaphragm solenoid valve AC pressure-free diversity has this difficulty now, and it can't be solved for the time being. How to achieve computerized control?The product is very simple. When it is powered on and off, it's going to likely be connected and disconnected. If you want to realize automation through PLC or other controller control, please have the opportunity yourself! Commonly used, it can be controlled via temperature control, time control, light control, and liquid level. And different controllers are geared up with solenoid valves to attain different functions. What is normally open and usually closed?The solenoid valve is energized and water-connected, and the power-off water is lower off. It is a usually closed type, which is more commonly used;The solenoid valve is energized to cut off the water, and the water is carry to a halt when the ability is off. It is never used for the usually open type. Please purchase according to your individual needs. Is the coil hot?The solenoid valve is a natural copper coil. It is common for long-term operation to generate heat. Generally, it may be continually energized for decades in an atmosphere the place the ambient temperature is less than 30 degrees. It is advised that the ambient temperature is higher than 30 degrees. . Lead length: 0

• 
• 
• 
• 
• 

Atsauksmes