Preces apraksts

• 64mm 83mm Coffee Bean Grinder Cutter Plate Blade For Fiorenzato F4E/F64E/F83E Coffee Bean GrinderPrecautions for cutter head installation ！！！！！① : After cutting off the previous cutter head, we need to freshen up all the inside residue, the cleaner the better!② : The three solving screws of the cutter head must be tightened evenly③ After the set up of the new cutter head, it should be manually became to test④ Test method: unscrew the big screw within the center of the cutter head by way of hand. If the scuffling with part of the higher and reduce cutter head has 50% area, you must tighten it and then alter the thickness of the powder, use! If there could also be less scuffling with part of the cutter head, you need to alter the route of the cutter head and then test, until the battling subject is as above, you need to upload powder debugging, use! The increased cutter head has 3 corners and may be adjusted in three directions! The scuffling with section is less, and the grinding powder can't be adjusted since the thickness could be very thick, and it might not be adjusted. Note: Due to the iron content of the material, the outside could be oxidized. Not second-hand or faulty products, do not impact the use, as lengthy because the machine grinds some coffee beans, oxidized section will disappear.

• 
• 
• 
• 
• 

Atsauksmes