Preces apraksts

• 20khz/2000W High Power Ultrasonic Transducer With Booster And 120*8mm Titanium Horn Welding Mold For Non-woven Plastic Welder The traits of ultrasonic transducerThe principle of ultrasonic welding transducer is analogous to that of cleaning transducer. It also achieves high-frequency vibration with large amplitude through making use of prestress to offset the growth stress of piezoelectric ceramics. Because the welding transducer requires super immediate power, it has excessive requirements for materials and technology. It is a high-power acoustic super energy device. Usually, it cooperates with the horn and dealing head to type a high-power and massive amplitude vibration components to complete the ultrasonic welding of plastics, metals and different materials welding is to generate high-frequency friction and heat on the touch hole floor of the welded object stressed during the ultrasonic vibration generated via method of the transducer, to be able to achieve the purpose of thermal fusion welding welding transducer is a high-power transducer with gap or pulse operation. Its calories is usually calculated via immediate top power installation1. Select right materials and alter hardness assignment to activity and bring horn and dealing head. When putting in the horn or operating head, make sure you eavesdrop on frequency matching, and observe sound instruction manual glue on the joint. Clean the joined surface with acetone and various solvents right through installation4. The impedance management strategy of the bonding exercise is established to play down the bonding impedance of the transducer and upgrade the electroacoustic conversion functionality of the transducer. Pay attention to convalescing the insulation measures after the installation of transducer electrode. Ultrasonic welding head (ultrasonic mold, ultrasonic horn)Ultrasonic welding head, straight in touch with the welded object, is accountable for transmitting ultrasonic vibration energy to the welded object. According to different ultrasonic frequencies on the source, welding heads with right frequencies needs to be used, and assorted frequencies cannot be mixed. The supplies commonly used for making welding heads are: aviation grade aluminum alloy, titanium alloy, hardened steel, etc. In order to attain the finest welding effect, the welding head should be accurately designed to completely transmit vibration energy. In addition to choosing right supplies based on product developments and special requirements, FEM analysis tips are often used to help in comparing the traditional of welding head design. This can upgrade product yield and shorten the method for designers transducer and horn,without generator. ModelPowerFrequencyPLS-HJDY300300W28KHZ,30KHZ,35KHZ,40KHZPLS-HJDY500500W28KHZ,30KHZ,35KHZ,40KHZPLS-HJDY800800W28KHZ,30KHZ,35KHZ,40KHZPLS-HJDY10001000W15KHZ,20KHZ,28KHZPLS-HJDY12001200W15KHZ,20KHZ,28KHZPLS-HJDY15001500W15KHZ,20KHZPLS-HJDY20002000W15KHZ,20KHZPLS-HJDY26002600W15KHZ,20KHZPLS-HJDY32003200W15KHZPLS-HJDY42004200W15KHZ

• 

Atsauksmes