Preces apraksts

• How to Prime Fluoride Filters with Priming Button Priming with the thick tan washer, referred to as the priming button is the strategy for priming Fluoride Filters. A priming button is included with each Fluoride Filter purchase. 1. With the blue caps in place wash the exterior of every fluoride filter out elements with water and delicate dishwashing soap, then rinse. 2. With clear hands, get rid of either blue caps from every single end of either filter out elements. 3. Place the rubber priming button (tan colored) onto one finish of a fluoride filter and align the outlet of the clear out with the outlet of the rubber washer. 4. Press the priming button up against the sink faucet in order that the priming button creates a seal between the faucet and the Fluoride Filter. Place your thumb on height of the tap to apply pressure, to create a more in-depth seal (as seen in picture). 5. While keeping the priming button against the faucet, switch on the bloodless water slowly, permitting water to fill the hollow space of the clear out and circulate from the choice end. 6. Allow water to flow for no less than 30 seconds or until water runs clear. 7. Turn the Fluoride filter out over and prime the other finish (reversing the flow of water) repeating steps 3-5 till water runs clear from both directions. 8. To choose if the filter is purely primed, compile the filtered water in a clear glass and preserve it up to the sunshine to seem if all of the cloudiness is long past from the water, if no longer continue priming till water is clear. 9. This filter is now primed and ready to install. 10. Repeat priming steps 1-7 for every extra Fluoride Filter. note: Different manufacturing unit batches can have varied appearance labels, that will not impact the use of the product Material: activated carbon colour: As shown Package Contents: 2 x Water Filter Only the above kit content, varied item usually are not included. Note: Light mirrored image and various displays can cause the colour of the object in the photo considerably assorted from the real thing. The size allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Atsauksmes