Preces apraksts

• 100W Piezoelectric Ultrasonic Transducer Oscillator For Industrial Cleaning Machine 28Khz The mechanism of ultrasonic cleaning is to make use of the bodily results equivalent to cavitation, radiation pressure and sound stream within the cleansing liquid. It can exfoliate the package produced during the dirt at the cleaning parts, and might additionally promote the chemical reaction between the cleansing liquid and the dirt, to be capable to obtain the point of cleaning the object. The frequency of the ultrasonic cleaning machine can be chosen by means of method of 10~500 kHz in line with the scale and goal of the cleaning material, commonly more than 20~50 kHz. With the increase of the frequency of ultrasonic transducer, Langerhans oscillator, longitudinal oscillator and thickness oscillator can be used. In the miniaturization aspect, radial vibration and flexural vibration also are adopted. Ultrasonic cleansing has change into more and more extensively utilized in several industries, agriculture, family equipment, electronics, automobile, rubber, printing, aircraft, food, health facility and clinical research. Ultrasonic vibrator set up process:1. Preparation tools: argon arc welding, hex wrench No. 10, ferrochrome wire, 2 sq. hot temperature wire, 2*2 cable wire, vibrator glue, (stripping pliers, casing, cable ties, sand blasting machine, Pipe fittings, etc.), the welding screw: Calculate the placement of the vibrator, weld the screw in the cleaned position, after which clean the screw around, make sure you make it flat, with the intention to not impact the establish of the vibrator, the glue configuration: squeeze A glue around the screw, then squeeze the B glue round the A glue, then quickly stir the AB glue with a small iron rod, in order that it's permanently mixed evenly. Install the vibrating head: Slightly push the transducer to squeeze out the air and additional glue between the lowest and the lowest touch surface, so that the vibrator is extra tightly included with the stainless-steel as a whole. Curing and solidification: It is cured at a relatively excessive room temperature, and may be linked in 4-8 hours. After 24 hours, it can be powered on: 1. Metal nailing machine can also replace argon arc welding. 2, the welding screws should be entirely welded, in any other case it is going to fall off easily, on the curing, the scale of time should evaluate the temperature, the temperature is low for a protracted time, the temperature is high, it is faster, it's endorsed to operate at room temperature, although heated, do not overheat, right Transducer Applications: Used In Ultrasonic Immersible Transducer ultrasonic Cleaning machine Ultrasonic Cleaner and Ultrasonic Pipe Cleaning,Ultrasonic Mixer etc.

• 
• 
• 

Atsauksmes