説明

• Feature: High CRI 96Ra+ Mirror aluminum base since the heat radiation Energy Star standard shade temperature colour Special color temperature 5600K for photographing, video Chromaticity range within 3-step MacAdam Ellipse LEDs type: COB LED chip: BRIDGELUX 2240mil External Dimensions: 28x28mm Luminous floor diameter: 24mm LED chip sizes: 2240（mil） Beam angle: a hundred and twenty diploma Luminous efficiency: 120lm / watt CRI:>96Ra Base material: Mirror aluminum Color tolerance: ＜3（SDCN） Thermal Resistance: ＜2 °C / W LED junction temperature: 90~120° LEDs arrangement: 12 in Series, 25 in Parallel (300pcs) LED integrated board enter current : 100W 2 recommend, 120W 3 max. put forward Forward Voltage: 36V ESD: 2000V Wire material: Gold wire Storage: To avoid moisture, we endorse garage conditions for the unopened LED +5 ~ +30℃relative humidity <60%. LED ought to be used within 168 Hrs. of opening the package. Pleasemake sure to dehumidify and vacuum pack the remaining/ unused LED. Dehumidifying condition:+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year. The soldering precautions: Soldering conditions: Reflow soldering is not commended for this LED. If hand soldering,set sol-dering iron temperature at 350℃ and soldering time no longer More than three seconds, afterthe first soldering, make sure the substrate surface temperature returns to ambient temperaturebefore a second soldering. Please. ensure when soldering, there is no exterior force on thesoldering surface and silicon batardeau (such as pressure, friction or sharp steel nails, etc.),to avoid gold cord deformation or dam-age and assorted abnormalities. If beyond recommendedconditions, we won't warrantly the LED stability, please do the possibility assessment first. Duringassembly, please be sure that a good quality thermal paste is utilized and distributed evenly overthe surface. While utilizing thermal pad (Heat Sink), ensure LED is firmly tightened and thereis no gap between surfaces. In such heat-media products, by way of way of a stress examine of at least500 volts. Anti-static measures: Please take sufficient measures to forestall electrostatic generation, such as wearingelectrostatic ring or anti-static fingerstall etc; any relative merchandise like plantequipment, machinery, carrier and transpor-tation units might be related to dischargingunit/ ground. The ESD sensitivity of this product is > 1000V（HBM）, after assembly the finallamp, please remember to discharge Static Electricity via appropriate ESD equipment. Temperature control: Recommended temperature situations for enhanced product life: Be certain to TS point (negativepads) managed below 85℃, COB suggestion colloid floor temperature management ≤150℃.

• 
• 
• 

レビュー