Description

• Ultrasound Frequency Detector With Piezoelectric Ceramic And Transducer Testing Fixtures 1KHZ To 3MHZImpedance analyzer is a electronic impedance analyzer and precision LCR meter that models the recent typical for impedance measurements within the frequency fluctuate from 1KHz‾5MHz (extended to 5 MHz when upgraded). The impedance analyzer is principally applicable to the size of impedance trends of various ultrasonic devices, including: piezoelectric ceramics, transducers, ultrasonic cleaners, ultrasonic plastic welding machines, hydroacoustics, magnetostrictive materials, ultrasonic pulverizers, and ultrasonic atomization. , Ultrasonic teeth cleaning, reversing radar, ultrasonic ranging, ultrasonic emulsification, ultrasonic descaling, ultrasonic motors and all other equipment utilizing ultrasound. The traits of the impedance analyzer are: clean to use, combination of alerts and graphics, correct parameters, low price, and powerful guidance for production. Impedance tester application:Transducer: The admittance circle diagram shouldn't seem parasitic circles, the resonance frequency needs to be as close to the design frequency as possible, the dynamic impedance should be low, the standard ingredient Qm must be near to the design requirements, and the capacitance must occasion the circuit. Piezoelectric ceramics: You can straight decide the standard of the gadget from the admittance circle diagram and logarithmic coordinates. If there are delaminations or cracks within the ceramic plate, the logarithmic curve will seem multi-peak, and the admittance circle diagram will appear a number of Madoka. Whether the design, processing and assembly of the horn is reasonable or defective could be of course seen immediately on the instruction manual circle chart. In the manufacturing and processing of ultrasonic welding machine, the state of the welding machine is analyzed through manner of the result of the admittance circle, and the issues recent in the welding machine are found in the course of the evaluation of parameters and graphics. Production and processing of ultrasonic cleaning machine: The choice of the vibrator calls for its vibration performance to be as constant as probable (bandwidth, figure of merit, resonance frequency, dynamic impedance). On the admittance circle chart, there ought to be no parasitic circles as much as probable or close to the resonance point. Impedance characteristic analysis and size of transducer manufacturing, incoming inspection, bonded transducer, and washing machine would be performed. The complete mechanical device measurement of the showering machine can calibrate the resonance frequency and static capacitance of the machine in order to tournament the power supply, and it will analyze its new resonance point, impedance after water injection, capacitance and characteristics of the vibration mode of the whole machine. ModelMeasuring FrequencyBasic AccuracyMeasuring ProductFeaturePLS-ZKFXY10001KHz-1MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY30001KHz-3MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY50001KHz-5MHz<0%ultrasonic transducer,piezoelectric ceramicdisplay

• 
• 
• 
• 

Review