Description

• Ultrasonic Industrial Cleaner Vibrator 120W Powerful Transducer Piezoelectric Sensor 28KThe mechanism of ultrasonic cleaning is to make use of the physical outcomes akin to cavitation, radiation pressure and sound move in the cleansing liquid. It can exfoliate the kit produced through the dirt at the cleaning parts, and may also promote the chemical response between the cleansing liquid and the dirt, with a view to acquire the purpose of cleansing the object. The frequency of the ultrasonic cleaning machine would be chosen by technique of 10~500 kHz per the size and goal of the cleaning material, commonly more than 20~50 kHz. With the rise of the frequency of ultrasonic transducer, Langerhans oscillator, longitudinal oscillator and thickness oscillator can be used. In the miniaturization aspect, radial vibration and flexural vibration also are adopted. Ultrasonic cleaning has develop into more and extra widely utilized in different industries, agriculture, relations equipment, electronics, automobile, rubber, printing, aircraft, food, medical institution and clinical research. Ultrasonic vibrator set up process:1. Preparation tools: argon arc welding, hex wrench No. 10, ferrochrome wire, 2 sq. hot temperature wire, 2*2 cable wire, vibrator glue, (stripping pliers, casing, cable ties, sand blasting machine, Pipe fittings, etc.), the welding screw: Calculate the situation of the vibrator, weld the screw within the cleaned position, after which clear the screw around, make sure you make it flat, in order not to influence the set up of the vibrator, the glue configuration: squeeze A glue around the screw, then squeeze the B glue round the A glue, then soon stir the AB glue with a small iron rod, in order that it's permanently mixed evenly. Install the vibrating head: Slightly push the transducer to squeeze out the air and additional glue between the lowest and the lowest contact surface, just so the vibrator is extra tightly included with the stainless-steel as a whole. Curing and solidification: It is cured at a relatively immoderate room temperature, and may be connected in 4-8 hours. After 24 hours, it may be powered on: 1. Metal nailing mechanical device also can replace argon arc welding. 2, the welding screws ought to be fully welded, otherwise it's going to fall off easily, at the curing, the dimensions of time should evaluate the temperature, the temperature is low for a protracted time, the temperature is high, it's faster, it's endorsed to operate at room temperature, even if heated, don't overheat, appropriate Transducer Applications: Used In Ultrasonic Immersible Transducer ultrasonic Cleaning mechanical device Ultrasonic Cleaner and Ultrasonic Pipe Cleaning,Ultrasonic Mixer etc.

• 
• 
• 

Review