Description

• Piezoelectric Transducer Components Ultrasonic Frequency Analyzer 1Mhz Smart Ultrasound Parts Inspection EquipmentImpedance analyzer is a digital impedance analyzer and precision LCR meter that units the new traditional for impedance measurements within the frequency fluctuate from 1KHz‾5MHz (extended to 5 MHz when upgraded). The impedance analyzer is principally applicable to the dimensions of impedance characteristics of varied ultrasonic devices, including: piezoelectric ceramics, transducers, ultrasonic cleaners, ultrasonic plastic welding machines, hydroacoustics, magnetostrictive materials, ultrasonic pulverizers, and ultrasonic atomization. , Ultrasonic teeth cleaning, reversing radar, ultrasonic ranging, ultrasonic emulsification, ultrasonic descaling, ultrasonic motors and all other equipment utilizing ultrasound. The trends of the impedance analyzer are: delicate to use, mixture of indicators and graphics, accurate parameters, low price, and powerful guidance for production. Impedance tester application:Transducer: The admittance circle diagram shouldn't seem parasitic circles, the resonance frequency should be as near to the design frequency as possible, the dynamic impedance should be low, the standard element Qm should be close to the design requirements, and the capacitance must occasion the circuit. Piezoelectric ceramics: You can directly decide the standard of the machine from the admittance circle diagram and logarithmic coordinates. If there are delaminations or cracks within the ceramic plate, the logarithmic curve will appear multi-peak, and the admittance circle diagram will appear several Madoka. Whether the design, processing and meeting of the horn is reasonable or faulty would be of course considered directly on the instruction manual circle chart. In the manufacturing and processing of ultrasonic welding machine, the state of the welding mechanical device is analyzed via way of the result of the admittance circle, and the issues present in the welding mechanical device are came upon within the course of the analysis of parameters and graphics. Production and processing of ultrasonic cleaning machine: The number of the vibrator demands its vibration performance to be as consistent as possible (bandwidth, determine of merit, resonance frequency, dynamic impedance). On the admittance circle chart, there ought to be no parasitic circles as a lot as possible or near the resonance point. Impedance characteristic analysis and size of transducer manufacturing, incoming inspection, bonded transducer, and washing machine could be performed. The total machine size of the showering mechanical device can calibrate the resonance frequency and static capacitance of the machine to be capable to event the power supply, and it'll analyze its new resonance point, impedance after water injection, capacitance and tendencies of the vibration mode of the entire machine. ModelMeasuring FrequencyBasic AccuracyMeasuring ProductFeaturePLS-ZKFXY10001KHz-1MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY30001KHz-3MHz<0%ultrasonic transducer,piezoelectric ceramicdisplayPLS-ZKFXY50001KHz-5MHz<0%ultrasonic transducer,piezoelectric ceramicdisplay

• 
• 
• 
• 

Review