Description

• Manual Operation Ultrasonic Cutting Fabric Equipment 35khz Portable Ultrasonic Cutting Machine For Plastic DeburringUltrasonic chopping knife, also referred to as ultrasonic chopping machine, is a type of ultrasonic package specially used for cutting. It is one of the principal classes of ultrasonic application. The precept of ultrasonic chopping is absolutely diverse from the traditional cutting. Ultrasonic decreasing is to apply the calories of ultrasonic transducer to warmth and soften the local part of the cut material, as a way to achieve the point of lowering material. Therefore, ultrasonic slicing would not need a sharp edge, nor does it want a lot of pressure, and will not trigger edge collapse and injury of the reduce material. At an identical time, due to ultrasonic vibration of the cutting knife, the friction resistance is awfully small, and the cut material is never smooth to stick to the blade. This is particularly nice for reducing viscous and elastic materials, frozen materials, akin to food, rubber, etc., or objects inconvenient to use strain of ultrasonic cutting machine:High stability: when the ultrasonic generator works, it produces 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the chopping knife and lowering materials. The mechanical decreasing is carried out. Therefore, sharp edges will not be required, the blade wear is small, and the cutter head can be replaced by means of itself pollution: when decreasing with ultrasonic knife, the temperature of the knife head is less than 50 ℃, that will not produce smoke and odor, removing the danger of harm and fireside throughout cutting cutting: due to the ultrasonic reducing through high-frequency vibration, the fabric won't adhere to the blade surface, just a small pressure is required right through cutting, and the fragile and soft materials are not deformed and worn. The materials reducing will mechanically seal the sting at the identical time, that isn't cause edge fall down operation: the reducing knife is hooked up to the ultrasonic generator, the generator is hooked up to 220V mains power, and the replace can be became on for cutting. It helps hand held reducing and is supplied with air-cooled interface large good thing about ultrasonic cutting is that it has fusion effect at the slicing part while cutting, and the slicing section is perfectly sealed, which will now not set off flash of textile materials. The use of ultrasonic decreasing knife would be expanded, akin to hole digging, shovel digging, paint scraping, carving and so on fluctuate of applications: all kinds of textile materials and plastic sheets would be cut via ultrasonic, comparable to pure fibers, artificial fibers, non-woven materials and knitted fabrics changes in the look or inner structure of the equipment brought on by upgrades or optimizations might be in keeping with the particular product. TypePower(W)Frequency (KHz)PLS-QGJ-100100W35khzPLS-QGJ-200200W35khzPLS-QGJ-300300W35khz

• 

Review