Description

• LUJINXUN 1” Tri Clamp 50 Brewing Equipment Heating Tube 1/2/5 TEN 304SUS Quick Connect Chuck Heater Element 1PC Specifications: Product Name: Flange Disc Heating TubeTube Length: 200mm/215mm/260mm/320mm/360mmVoltage: 110V/220V/380VPower: 1/2/3/4/5 Diameter: 8mmThread Diameter: 32mmFlange Disc: 50 (1 Tri-clamp)Tube Material: 304 stainless steelThread Material: 304 stainless steelPackage Contents: According to what you select Pay attention: Power Allowance -10%~+5% 01/Introduction to Heating Tube:This heating tube is used as a heating detail inside water tanks, boilers, and water towers for brewing and fermentation equipment. No matter what model you choose, you would update it with the appropriate specifications. 02/How to measure the dimensions of heating tubes :① Voltage: 220V or 380V, Power: How many KW② Flange specifications: 51 flange=outer diameter 51mm, sixty four flange=outer diameter 64mm, seventy seven flange=outer diameter 77, 91 flange=outer diameter 91mm③ Tube length: The size can fluctuate slightly, as prolonged as it could be put in into the method 03/Instructions: 1. Before installation, use a multimeter to examine if the heating tube is powered on. If the size is correct, then continue with installation. If the measurement isn't powered on, please touch customer service. 2. The heating discipline of the heating tube needs to be permanently submerged underwater before the ability could be became on, and dehydration and dry burning are strictly prohibited. (Dehydration and dry burning speak over with heating features which are in part or completely exposed to the water floor and electrified within the air. As warm temperature cannot be transferred out by way of water, it is completely absorbed via the steel tube, which may cause the steel tube physique to show black and bulge, or maybe burn, break, or melt.) 3. If the heating kit is equipped with an automatic water filling device, the ball valve needs to be recalibrated after each replacement of the heating tube to be sure that the liquid point is much above the location of the heating tube before it may be used. To costly all,1. Heaters are enterprise products, no longer vase. some may have flaws, comparable to weld, reminiscent of stainless steel trace and polish trace,that&;s normal. Because the heating wire contained in the heater tube is made of OCr25A15 which is Magnetic, it's typical that the element could be adsorbed by means of means of magnet. Under the location of insulation, the overseas standard for the heater energy accept allowance -10% to 5% you're care about these, please consider carefully earlier than make order. We do not accept dispute or detrimental suggestions about these you on your attention. Application: The electric heating tube can't solely be used as a heater for closed oil tanks, oil drums and hydraulic oil devices, but additionally as water tanks, boiler heaters, tank heaters, mould temperature mechanical device heaters, etc., and are extensively utilized in the heating of tanks-tanks-equipment in electronics, plastics, chemical industry and environmental engineering NOTICEAll programs from our shop are registered site: 17track/en, PAYMENTVISA,Mastercard,WESTERN UNION,Maestro,Bank Transfer,QIVI WALLET,WebMoney,Boletol,PayPal WARRANTY SERVICEDelivery Time:Ship out within 3-5working daysAll emails is probably answered within 24 hours REFUND or RESENDIf items now not received or damaged,please cooperate with us to take photographs once you get keep of it, then gift us the evidence,we will refund or resend a brand new one to you,thanks FEEDBACKAny questions please be at liberty touch with us before you leaving a feedback,we will try the best that may enable you to solve it Immediately.

• 
• 
• 
• 
• 

Review