Description

• Scenes to be used: At the performance web content or all the way through engineering debugging, if the signal of a few lamps is unstable, or the lamps are out of control or unresponsive. You can use this sign line tester to check signals, or you can check sign traces individually. One finish of the signal cable is attached to the sign output port of the console, and the alternative finish is attached to the signal tester. Warm reminder: During testing, it must be ensured that the console is hooked up to the signal. Testing on ports aside from sign traces is rarely allowed. Each lighting fixtures console has a different refresh rate, so some testers will trigger the LED indicator to flicker when checking out signals. (This undertaking doesn't impact the conventional use of the road measuring device) Line measuring system fault prompt: 1. The blue, red and green alerts are all on, which means the sign is normal. 2. A single inexperienced indicator comfortable lights up, indicating that the floor wire is disconnected or short-circuited. 3. A unmarried blue indicator mild lighting fixtures up, indicating that the advantageous pole of the signal is disconnected or short-circuited. 4. A unmarried red indicator tender light fixtures up, indicating that the negative pole of the sign is disconnected or short-circuited. 5. The red and inexperienced indicator lighting fixtures are on, indicating that the damaging pole of the sign and the floor cord are short-circuited. Colour:As Shown Material:Stainless metal Package Contents: 1 * DMX512 line tester Only the above kit content, different merchandise aren't included. Note: Light reflection and assorted reveals could cause the color of the thing within the photograph somewhat diversified from the real thing. The size allowed error is +/- 1-3cm.

• 
• 
• 
• 
• 

Review