Description

•   3.5 Inch LCD Kleurenscherm Digitale Deurbel Elektronische Peephole Deur Camera Viewer a hundred and twenty Graden Cat's Eye Outdoor Deurbel Mini outside digital camera 3.5-inch LCD color screen OV Industrial High Definition Color Image Sensor 120 diploma precise viewing attitude 24 hours tracking   Specifications: Type: magic eye Material: Zinc Alloy Type: Digital Doorbell LCD screen: 3.5 inch  Sensor: 2 Mega CMOS Sensor Function: Energy saving, Low Power Alert Power supply: 4pcs AAA batteries (not included) Door Hole Range: 14-28mm Door Thickness Range: 35-100mm Keyword: digital door viewer Power source: 4pcs AAA batteries door hole diameter: 14-28 mm Door Thickness: 35-100 mm Indoor device size: 120x62x20 mm  Diameter (camera outdoors): 30 mm Net weight: 197g         Note: 1. There may be slight size deviations thanks to guide measurement, assorted measuring tricks and tools. 2. The photo might not reflect the particular color of the article thanks to various photographing light, attitude and reveal monitor.   package: 1 x Outdoor Unit               1 x Indoor Unit three x  Screw 1 x Metal bracket                   Function operation:   Press the power button to show on the demonstrate image, you may be aware the scene outside the door in real time during the reveal screen, and mechanically close down after 15 seconds of power on.   1. Power on: Press the ability button   2. Shutdown: It will automatically shut down after 15 seconds of power on, and it's going to even be shut down by means of long pressing the flexibility button for 3 seconds in the power-on state.   Installation diagram and installation instructions:   Step 1: Open the screw pack and select screws of correct size according to the thickness of the door. Screw two screws into the metal protruding rods of the open air unit in advance.   Step 2: Insert the outside unit into the door hole, get rid of the metallic bracket from the back of the foremost unit, cross the cable of the outdoor unit through the upper slot gap of the metallic bracket, cross the screw throughout the lower slot gap of the metallic bracket, and cling the steel bracket at the door at the screw of the exterior mechanical device sticking out rod. (Note: the triangular notch of the door outdoor unit is upward, and the arrow path of the steel bracket is upward). After checking the path of the door outside unit and the metal bracket, push and pull the metallic bracket to the left in order that the metal bracket is locked through the screw. Then tighten the 2 screws until the bracket and outside unit are securely fastened.   Step 3: Open the battery conceal of the host, and put the battery into the host (the battery disguise has the battery polarity mark).   Step 4: Align the 4 slots on the back of the indoor unit with the four hooks of the steel bracket, and then pull down the indoor unit firmly till it is locked.   Step 5: Peel off the protective movie on the surface of the indoor and outside units. Installed.

• 
• 
• 
• 
• 

Review