Description

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler SealantDescription:1.It has high energy and rapid bonding effect, and is acceptable for immediately attaching diverse components, LEDs and warmth sinks. 2.Good thermal conductivity, solid adhesion, vacuum packaging isn't always smooth to oxidize and dry, nice viscosity, short drying time. 3.It has good conductivity, large operating temperature vary (-60~200°C), and short-term resistance to 300°C. 4.It has brief floor curing time, long garage period, non-toxic, solvent-free, and can be safely utilized to elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product immediately throughout use, rubbing the outside of the adherend, and directly protecting it after use, in case of trial back 2) The floor fixed speed is related to the relative humidity and temperature within the air; the higher the temperature, the quicker the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to scrub the outside of the bonded object earlier than use (such as alcohol), keep away from cleansing with detergent, and practice it after the surface is clean. 6.The kit is sealing and the product is roofed with a vacuum bag to insulate the air and broaden the storage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: 0 (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Review