NOTE: 1 LED Strip paintings at DC5V voltage only! otherwise led strip will burn. 2 LED Strip isn't inlcude WS2812B LED Controller and Power Adapter. 3 the light strip is in white light, it's going to progressively alternative from white comfortable to orange light. This is caused by insufficient voltage. You fully should expand the voltage to unravel it. Description: Type:Ultra Narrow WS2812 Digital Dream Color LED Strip IC Type:WS2812B SMD Type: 2020SMD Voltage :DC5V Color:Addressable RGB Dream Color LED Qty:60LEDs/M; 160LEDs/M PCB Width:5mm Cutted:Each Led Can be Cutted IP rated:IP20;non-waterproof Pins:3 Wires = 5V+(Red wire), DATA(Green wire), GND(White wire) Length:1m/2m/3m/5m Features: 1. WS2812 chips are organized in a linear way, integrated package, with uniform mild colour and no gentle spot; 2. High thermal conductivity bendy circuit board design, would be bent at will, handy for installation; 3. The LED COB chip is immediately constant on the FPC, and the luminous angle can attain one hundred eighty degrees; 4. The back is pasted with excessive viscosity warmth conduction double-sided adhesive tape, which is handy for set up and agency and sturdy for pasting; 5. LED gentle source, energy-saving and environmental protection, in line with nationwide environmental standards.