विवरण

• Precautions (please read carefully earlier than use): 1: Resin glue curing pace is expounded to volume size and temperature, the thicker the adhesive layer, the quicker the curing, the higher the temperature, the faster the curing.Therefore, the extra mixing, the shorter the operating time, the bigger the scale of the seal will be, the slower the reverse. 2: Resin and curing agent reaction can be hot, the thicker the glue layer will produce extra heat, warmth assembly has bubbles produced, so the matching glue to be used quickly, brush thin will solidify slowly. 3: A,B two groups must be strictly proportional weighing, B ingredients an excessive amount of or too little will impact the performance of the curing; A, B two elements mixed, must stir evenly, stirring choppy will trigger part of the curing, part of the non-curing condition. If you're a beginner, please use an digital scale to simply verify the ratio of A glue to B glue. 4: Glue within the curing process, curing agent will suck tide, when the air humidity is large, after curing the skin may have a layer of oily feeling, so the curing job to keep dry, do not solidify within the humidity of the environment, when the oil is produced, you might dry the surface, and then sandpaper grinding. 5: When the temperature is low, the A section could have crystallization phenomenon, reminiscent of the manufacturing of granular rubber slag or permanently frozen, when the use of a glue can be heated, the temperature will be open, after the hole can be used normally, doesn't impression the performance. 6: Use is cautious to not touch the skin, contact with the surface occasionally there'll be allergic phenomenon produced! Please wear disposable gloves through the DIY crafts making process.

• 
• 
• 
• 
• 

समीक्षा