Body Material: Brass Handle Material: Brass Finish: Chrome How to install? STEP 1: Turn off the water supply valve, then flush the lavatory and hold down the manage to drain the tank completely. STEP 2: Make yes there is a rubber washing machine contained within the T-valve water inlet. STEP 3: Connect the toilet, T-Valve and two Hoses. STEP 4: Turn at the water delivery valve and watch the hose, If there are any connection is free or leaking, you must upload some water-resistant tape. If leak-free, then your installnation is over. Warm Tips: 1. Please make certain your toilet tank's water inlet diameter is 1/2" for this set to be installed. 2. You may well using the T-valve alter the water supply to a low level so the water pressure on the hose and sprayer isn't too high. 3. Be careful to not over-tighten the connection. What is in package include? T-shaped valve x 1 COLOR SIZE Product photos have been taken in kind, for display, light, surroundings causes perchance a slight deviation phenomenon, please in form prevail. Due to lead measurement, there perhaps 1cm-3cm tolerance, please kindly perceive and make sure you don't mind earlier than you place the order.