Beschreibungen

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler Radiator CoolDescription:1.It has excessive strength and fast bonding effect, and is suitable for straight attaching diversified components, LEDs and heat sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging isn't easy to oxidize and dry, good viscosity, brief drying time. 3.It has good conductivity, vast operating temperature range (-60~200°C), and short-term resistance to 300°C. 4.It has quick floor curing time, long storage period, non-toxic, solvent-free, and may be safely applied to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product immediately during use, rubbing the outside of the adherend, and instantly covering it after use, in case of trial again 2) The floor fixed pace is expounded to the relative humidity and temperature in the air; the better the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to scrub the outside of the bonded object before use (such as alcohol), keep away from cleansing with detergent, and practice it after the skin is clean. 6.The kit is sealing and the product is roofed with a vacuum bag to insulate the air and increase the garage time.Specifications:Thermal properties, stable glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Rückmeldung